Cuneatic Electronic, Guangzhou, China

Home security

　 Control panel:

　R75-N (Contact ID reporting)

　R75-V (voice reporting)

　Wireless door magnet:

　MC-A1

　MC-A2

　Wireless motion detector:

　MD-A1

　MD-A1-P

　MD-A2

　MD-A2-P

　Wireless keyfob:

　WK-1

　Wireless-hardwire signal translator:

　LtoH-8

　Wireless siren:

　SR-2

　Wireless repeater:

　RP-G2

　Hardwire infrared motion detector:

　A2-P

　hardwire control and keypad:

　Control RH-11

　Keypad K-1

SD card cameras

Fish watching devices

Portable surveillance

Parking space sensor

CID monitoring center

ODM devices

Hardwire infrared motion detector: A2-P

THE A2 SERIES INCLUDES TWO MODELS:

A2 (GENERAL MOTION DETECTOR) AND A2-P(PET-IMMUNE MOTION DETECTOR)

A2/A2-P FEATURES

Total environmental immunity.

SMD technology.

Dual mode sensitivity adjustment.

Maximum RFI & EMI immunity.

Relay for Lifetime operation.

Bi-directional temperature compensation.

TECHNICAL SPECIFICATIONS

MODEL A2

Detection Method dual-element PIR

Power Input 8.2 to 16 VDC

Current Draw Standby with LED (Blue): 12mA

Standby without LED: 10mA

Active with LED(Red): 11Ma

Temperature Compensation yes

Pulse Width Adjustable

Alarm Period 2 +/-1 sec

Alarm Output N.C 28VDC 0.1 A with a 10 Ohm

series protection resistor

Tamper Switch N.C 28VDC 0.1 A with 10 Ohm series protection

resistor - open when cover is removed

Warm Up Period ~ 60 sec

LED indicator LED (Red) is ON during alarm

Operating Temperature -10°C to +50°C

Dimensions 75mm×66mm×91mm (3.0＂×2.6＂×3.6＂)

Weight 105 gr(3.7 oz)

SENSITIVITY ADJUSTMENT
The sensitivity potentiometer should be adjusted according to the security risk level at the installation site.
For high false-alarm rate locations, the sensitivity should be the sensitivity close to MIN (9%). In low false-alarm rate situations, the sensitivity should be adjusted closer to MAX (100%)

FIELD OF VIEW