R65 series are advanced models among controls of wireless home security systems. With more functions and more reliable new tech, R65 series satisfy user's needs of home security by integrating latest wireless and information technology. The difference between R65-S and R65-N is their reporting modes – report to central station or to both station and telephones.
R65-S sends alarm messages to the telephone or cell phone numbers preset by users. This is called independent working mode.
When the detectors sense environmental changes, for example someone goes into your home or fire starts at your kitchen, they send wireless signals out. When R65-S receives these signals, it dials the telephone numbers stored in its memory. The illustration is as following:

Integrated in R65-S:
　　　　　　　　　　　control, indicating equipment,
　　　　　　　　　　　80x50mm blue LCD,
　　　　　　　　　　　color membrane switch keypad as user input interface,
　　　　　　　　　　　color LED as instruction,
　　　　　　　　　　　back-up battery,
　　　　　　　　　　　alarm transmission equipment,
　　　　　　　　　　　self-powered siren,
　　　　　　　　　　　storage device.
Operation mode: 3 modes. Stay, Away, and Disarm.
Zones:　　　　　　16 burglar-proof zones, up to 32 detectors
　　　　　　　　　　1 fire detection zone, up to 2 detectors
　　　　　　　　　　1 hazardous gas detection zone, up to 2 detectors
　　　　　　　　　　1 emergency zone, up to 2 hold-up buttons
　　　　　　　　　　1 door chime zone, up to 2 chime buttons
User number:　　　up to 8 different passwords
　　　　　　　　　　up to 8 wireless keys
Event record:　　　alarm record, fault record, arm/disarm record, and data change record
　　　　　　　　　　Total 250 pieces
Personal setting: 10 telephone numbers, entry/exit delay times… total 20 adjustable 　　　　　　　　　　parameters
Operation instruction: voice and LCD
Access level management: four levels

Standard:　　　　DD CLC/TS 50131-3: 2003
　　　　　　　　　EN50131-5-3: 2005
Security grade:　2
Environmental class 1: Indoor
Adaptor input:　100-240VAC50/60Hz260mA
Output:　　　　　12VDC 400mA
Dimension:　　　244x167x45 (mm)
Operating temperature range: 10℃- 40℃
Maximum current consumption (with an alarm conditon, inside siren sounding): 220mA
Quiescent current consumption (without an alarm condition): 70mA
Output to external siren:　　12V 120mA
Wireless frequency:　　　　　315/433M
Additional function: 　　　　　answer machine, door chime

Technical Features
A: Wireless and DIY
All detectors, contacts, and hold-up buttons are wireless devices. You can add new devices, delete any existing one, or move the devices aslong as you want.
Just following the Guide, users can install the system by themselves.
Meanwhile, users can adjust parameters to reconfigure R65-S. Thus, the system is flexible for almost any circumstance.
To enhance the reliability of R65-S system, we adopted ZLO anti-interference technology and self-check technology. R65-S can resist some kinds of RF interference and generate maintenance message automatically.

B: Two-way voice
R65 calls the telephone numbers preset by users when there comes a alarm.Listeners can acquire the following alarm information:
Whose home it is (pre-recorded by user), what kind alarm it is (an emergency call? a burglar alarm? or other reasons?), how many zones the intruder has passed, and the zone numbers (only for burglar).
Listeners can follow voice instruction to take following operations:
Confirm the alarm, disarm the security system, monitor, talk with the intruder, stop siren, or start siren.
Using these functions, users may evaluate the circumstance, and then take proper actions.

C: Use the system anywhere by just making a call
Users can operate their systems by local keypad, wireless keys, or by just making a call to home.
R65-S answers incoming calls automatically if no one is at home. Following the voivc instruction. callers can take following operations:
Leave voice message, check voice messages(password required), set system 'arm', or set 'disarm'(password required).
If someone tries your passwords, R65-S will send an 'invalid password attempt ion' alarm.